Mars Exploration News  
MARSDAILY
Sensors prepare to collect data as Perseverance enters Martian atmosphere
by Staff Writers
Pasadena CA (JPL) Feb 15, 2021

MEDLI2 sensors are installed on the Mars 2020 heat shield and back shell prior that will protect NASA's Perseverance rover on its journey to the surface of Mars.

Nearly six-and-a-half months and 300 million miles since launch, NASA's Perseverance rover will land on Mars Feb. 18, 2021, to begin its robotic exploration of the Red Planet. But before Perseverance touches down on the surface of Mars, it has to achieve a successful entry, descent, and landing (EDL).

Onboard the rover's protective aeroshell is the Mars Entry, Descent, and Landing Instrumentation 2 (MEDLI2), which will collect critical data about the harsh entry environment during Perseverance's entry through the planet's atmosphere. While not used as part of the Mars 2020 controls for this Mars landing, the MEDLI2 data will help improve the designs of entry systems for future robotic and crewed Mars missions.

MEDLI2 includes three types of sensors - thermocouples, heat flux sensors, and pressure transducers - that will measure extreme heat and pressure during entry. It also contains electronics and hardware for recording the thermal and pressure loads experienced during entry and through the parachute deployment. In total, 28 sensors are arranged in a unique pattern across the heat shield and back shell of the Mars 2020 entry vehicle.

The sensors will build on what we already know about the unique heating phenomena on a heat shield, density of the Martian atmosphere, and impact of lower-altitude winds on the entry vehicle's flight path. MEDLI2 will also provide NASA's first-ever direct heat measurements experienced by an entry vehicle's back shell at Mars.

"Recent successful checkouts of our MEDLI2 hardware during the Mars 2020 cruise demonstrates that our system is performing as intended and has survived the initial round of harsh flight environments," said Henry Wright, MEDLI2 project manager at NASA's Langley Research Center in Hampton, Virginia. "We are eager for the successful EDL of Mars 2020!"

MEDLI2's role on landing day
Perseverance will power on MEDLI2 about five hours before entry to provide sufficient time for the system to warm up and acquire the initial conditions of the entry vehicle. During the final five-hour coast to Mars, MEDLI2 sensor data will be provided to Mars 2020 about every 45 minutes to monitor the health of MEDLI2 and to provide updates of the entry vehicle surface temperatures. About 10 minutes before the atmospheric entry, the Mars 2020 spacecraft will begin collecting continuous MEDLI2 data.

The data will show the increase in heating and pressure as the entry vehicle passes through the atmosphere of Mars. MEDLI2 will keep collecting data after the peak heating (maximum heat shield surface temperature of about 2,300 to 2,400 degrees Fahrenheit, or 1,200 to 1,300 degrees Celsius) and peak pressure. During the final 100 seconds of the entry, the vehicle will be in the supersonic flight phase, where the MEDLI2 pressure transducers collect data as part of the observations of wind speed and direction as well as vehicle performance.

Perseverance will power down MEDLI2 about 10 seconds after the supersonic parachute deploys. Then after another 10 seconds, the heat shield (which carries the MEDLI2 power and data acquisition hardware) will separate from the entry vehicle and fall to the surface of Mars.

After the Perseverance rover and the powered descent stage separate from the back shell, the remaining MEDLI2 hardware in the back shell will descend to the surface with the parachute. The powered descent stage will continue its path to Mars and land Perseverance in Jezero Crater. The MEDLI2 data, stored on the Perseverance rover, will be sent back to Earth within about a week of landing.

The MEDLI2 operations team will support the Mars 2020 project during Perseverance's final approach and entry phases by assessing a subset of the MEDLI2 data as it is returned near real time. This data will provide the first look at the overall entry performance of the vehicle.

"I am proud of the MEDLI2 team," Wright said. "It isn't easy developing new, one-of-a-kind space hardware, especially with a fixed delivery date. The team always remained focused on ensuring the MEDLI2 system will perform as intended, despite development setbacks and challenges introduced by the pandemic."

MEDLI2 is a Game Changing Development Program project. NASA's Space Technology Mission Directorate funded the technology with support from the Human Exploration and Operations Mission Directorate and Science Mission Directorate. MEDLI2 is managed at NASA's Langley Research Center in Hampton, Virginia, and implemented in partnership with NASA's Ames Research Center in California's Silicon Valley and NASA's Jet Propulsion Laboratory in Southern California. Langley led the development of the pressure transducers, the data acquisition and signal conditioning electronics, the intra-instrument harnessing, and the systems engineering. Ames led the development of the thermal protection system sensors, the heating sensors, and is the lead for science (principal investigator). JPL, which is managed for NASA by Caltech, led integration of MEDLI2 into the Mars 2020 spacecraft system. JPL also built and manages operations of the Perseverance rover. Lockheed Martin built the heat shield and back shell, and physically integrated the sensors and electronics.


Related Links
Mars Entry, Descent, and Landing Instrumentation 2 (MEDLI2),
Mars News and Information at MarsDaily.com
Lunar Dreams and more


Thanks for being here;
We need your help. The SpaceDaily news network continues to grow but revenues have never been harder to maintain.

With the rise of Ad Blockers, and Facebook - our traditional revenue sources via quality network advertising continues to decline. And unlike so many other news sites, we don't have a paywall - with those annoying usernames and passwords.

Our news coverage takes time and effort to publish 365 days a year.

If you find our news sites informative and useful then please consider becoming a regular supporter or for now make a one off contribution.
SpaceDaily Contributor
$5 Billed Once


credit card or paypal
SpaceDaily Monthly Supporter
$5 Billed Monthly


paypal only


MARSDAILY
ExoMars discovers new gas and traces water loss on Mars
Paris (ESA) Feb 11, 2021
Sea salt embedded in the dusty surface of Mars and lofted into the planet's atmosphere has led to the discovery of hydrogen chloride - the first time the ESA-Roscosmos ExoMars Trace Gas Orbiter has detected a new gas. The spacecraft is also providing new information about how Mars is losing its water. A major quest in Mars exploration is hunting for atmospheric gases linked to biological or geological activity, as well as understanding the past and present water inventory of the planet, to determi ... read more

Comment using your Disqus, Facebook, Google or Twitter login.



Share this article via these popular social media networks
del.icio.usdel.icio.us DiggDigg RedditReddit GoogleGoogle

MARSDAILY
Ozmens' SNC delivers prototype lunar crew module to DYNETICS

How to Get Water on the Moon

Teaching an Old Spacecraft New Tricks to Continue Exploring the Moon

NASA awards contract to launch initial elements for lunar outpost

MARSDAILY
Chinese tracking vessel sets sail for monitoring missions in Indian Ocean

China's 'space dream': A Long March to the Moon and beyond

Three generations dedicated to space program

China's space station core module, cargo craft pass factory review

MARSDAILY
What Hollywood gets wrong, and right, about asteroids

NASA's first mission to the Trojan Asteroids installs its final scientific instrument

NASA's OSIRIS-REx to Fly a Farewell Tour of Bennu

An asteroid "double disaster" struck Germany in the Miocene

MARSDAILY
Solar system's most distant planetoid confirmed

Peering at the Surface of a Nearby Moon

A Hot Spot on Jupiter

The 15th Anniversary of New Horizons Leaving Earth

MARSDAILY
Saturn's Tilt Caused By Its Moons

Astronomers estimate Titan's largest sea is 1,000 feet deep

SwRI models point to a potentially diverse metabolic menu at Enceladus

MARSDAILY
ACTIVATE begins second year of Marine Cloud Study

Slovenia releases color image from NEMO-HD microsat

Pioneering NASA mini weather satellite ends its mission

Emissions of ozone-eating chemical CFC-11 are on the decline again

MARSDAILY
Ball Aerospace to integrate and test "sailcraft" for NASA solar propulsion demonstration

The Planetary Society Presents NASA Recommendations to the Biden-Harris Administration

Early crewed travel to Mars

Best way to get around the Solar System

MARSDAILY
Lasers reveal the secret interior of rocky exoplanets

A new way of forming planets

Super-Earth atmospheres probed at Sandia's Z machine

Can super-Earth interior dynamics set the table for habitability









The content herein, unless otherwise known to be public domain, are Copyright 1995-2024 - Space Media Network. All websites are published in Australia and are solely subject to Australian law and governed by Fair Use principals for news reporting and research purposes. AFP, UPI and IANS news wire stories are copyright Agence France-Presse, United Press International and Indo-Asia News Service. ESA news reports are copyright European Space Agency. All NASA sourced material is public domain. Additional copyrights may apply in whole or part to other bona fide parties. All articles labeled "by Staff Writers" include reports supplied to Space Media Network by industry news wires, PR agencies, corporate press officers and the like. Such articles are individually curated and edited by Space Media Network staff on the basis of the report's information value to our industry and professional readership. Advertising does not imply endorsement, agreement or approval of any opinions, statements or information provided by Space Media Network on any Web page published or hosted by Space Media Network. General Data Protection Regulation (GDPR) Statement Our advertisers use various cookies and the like to deliver the best ad banner available at one time. All network advertising suppliers have GDPR policies (Legitimate Interest) that conform with EU regulations for data collection. By using our websites you consent to cookie based advertising. If you do not agree with this then you must stop using the websites from May 25, 2018. Privacy Statement. Additional information can be found here at About Us.